A creepy male voice spoke to our children, and scared them. I get decent signal with motion eye but there's no audio which is a bummer and still plenty of drops.
The wyze rtsp firmware is a year old and there hasn't been an update in 6 months at least.
Wyze cam hack. The idea is super easy: I have the official v2 rtsp on my older cams fed into motioneye in homeassistant and getting person notification via telegram and its rock solid. Rtsp configuration page with settings for rotate, mirror, flip, resolution, etc.
Your iot devices (like smart plugs, your wyze camera, etc) would be setup on myguestnetwork. Technical information about the hack: Integration in home automation systems:
Xiaomi dafang hacks / xiaofang 1s / wyzecam v2 / wyzecam pan / other t20 devices attention: Make sure camera has latest firmware from wyze app (makes it easier to test if revised firmware is loaded) note camera's mac address,. The wyze labs database that holds millions of customers' information was breached which makes it possible for hackers to have the necessary information to get into people's wyze cam.
So i paired it up with a motion sensor, turned off all alerts on the camera, and used only the sensor to send smart video alerts to the camera. Obviously, i must up my clutter control game. Has anyone else had this happen?
What happens if this online database gets hacked? So i have to make some version specific changes, and there may be more version specific changes coming later if they changed it again. But who likes the idea of a constant video stream in your home being sent to servers in china, america, france… anywhere.
Some unique identification stored in nvram. This is a hack to allow live streaming from a wyze cam on your local network. Wyze makes these amazing little cameras for $25;
Customer's email addresses and a list of cameras in their homes were exposed and that's enough information to help a hacker initiate an attack to try gain access. All versions of the cam (ismart/xiaomi/wyze) presumably use the same mechanism to pair with cloud: This means we may need more frequently releases than before (worst case for every stable firmware).
That’s a vlc screen capture from the rtsp stream; It will disable the support of this hack. However, the main reason that i chose the wyze cam v2 is that it's easy to replace the firmware.
Last sunday, our wyze cam got hacked. The wyze cameras upload to the amazon aws cloud, which is known to be pretty secure, but when you have video signal being transmitted over the internet, the signal could get intercepted or fall victim to certain attacks that would result in a hack. In case anybody else is interested in hacking the wyze cam cameras so they are local, here are the steps i went through to successfully update one of my pan cameras with this hack:
Another attempt at replacing the wyze camera firmware went much more smoothly, producing a pair of small cameras with better network manners: I just don't think the hardware can hack it. Scp update script from shell to camera
Do not install the latest firmware on your device. How to install the cfw support partner community: 1080p, infrared capable, two way audio.
I installed a wyze cam pan outside of our front door but i found that it was sending too many false motion alerts for everything from the leaves blowing on our tree to cars passing by on the street and people walking by on the sidewalk. Grab the latest file from nfs folder made by wyze cam. Use ffmpeg to convert that 1 min mp4 file into hls stream:
Hack neoscam / wyzecam v2 the neoscam is a great value camera, retailing at around £30 on amazon in the uk. (and yes i tried dafang hacks, it worked ok but not any better than the wyze imo) Rtsp authentication is now possible.
I have two cameras and no i have not had this happen. One will simply get disconnected when the other one connects. Easily hack your wyzecam v2.
M3u8 playlist + ts chunks. Wyze cam v3 rtsp best interim hack for person detection. Crontab watchdog to reboot rtsp script.
I am not willing to upload video from my house to a cloud server. The way wyze cameras work means that all the customer’s accounts information is stored on the wyze labs cloud server. Well, that’s what happened not long ago, the wyze labs database was breached and all the users’ information was leaked.
Heather.wolkstein january 9, 2020, 1:26am #1. You can easily clone that to a different cam, but you can't connect two cams with the same id to a cloud. The wyze cam v3 is an impressive little piece of hardware, but for my application i need to be able to batch download, across the internet, the raw recording files stored on the cam's internal microsd card.
Since wyze won't be releasing an official v3 rtsp firmware for a while (ever?) what's the best way to do this nowadays? Revert to original wyze firmware instructions. Parse that playlist to create a new playlist that will be fed to shinobi.
Wyze cam v2 (or a xiaomi equivalent, i.e. Paindonthurt january 9, 2020, 1:34am #2. Each of those devices can talk to each other.
The drawback is their firmware is very limited and you’re stuck trusting their web services. In the readme of the firmware that you link to, i see no mention of rtsp. After installing the firmware, you should be able to connect the camera to securityspy using the following setup: